Product Details:
Compressor Type | Screw Compressor |
Air Compressor Model | TD M series |
Operating Pressure | 16, 25, 50, 150 Bar |
Drain Capacity | 95 l/h |
Connections | 1/2 |
Operating Temp. Range | 1,5 To 65 DegreeC |
Product Code: TD M series
TD M series
TD M timer controlled condensate drain is designed for reliable removal of condensate or other liquid from compressed air system. Discharge intervals can be set with two adjustment knobs. TD M drain is available in several types based on operating pressure and operating medium. TD M can be used in variety of applications. For applications not listed please contact producer or your local dealer.
Product Details:
Air Compressor Model | TAC series |
Automation Grade | Automatic |
Air Flow | 6 To 6500 Nm3/h |
Operating Pressure | 16 Bar |
Inlet Air Temperature Range | 1.5 To 45 DegreeC |
Connections | 3/8 To DN125 |
Standard Colour | RAL 9005 |
Product Code: TAC series
TAC series
TAC activated carbon towers have been developed for separating oil vapours from compressed air (dry type separation). TAC series is made from high quality carbon steel. Flow distributors ensure uniform distribution of air flow through activated carbon bed. Oil vapours as well as some other hydrocarbons are separated due to adsorption process. Super fine coalescing filter is required upstream TAC and 1μm dust filter is recommended downstream to intercept activated carbon dust. Stainless steel version available on request. High pressure version available on request.
Product Details:
Compressor Type | Screw Compressor |
Air Compressor Model | AOK 50SS |
Operating Pressure | 8 - 50 Bar |
Drain Capacity | 145 l/h |
Connections | 1/2 |
Operating Temp. Range | 1,5 To 65 DegreeC |
Material | Stainless Steel 1.4404 |
Product Code: AOK 50SS
AOK 50SS
AOK50SS has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and is discharged from the system when the level is high enough. A direct acting valve is operated by a precise level controlled floater which assures reliable and efficient operation. Thanks to its robust stainless steel housing AOK50 SS is suitable for heavy duty applications. On the front, the AOK50 SS, is also equipped with a separate manual drain for venting
Product Details:
Compressor Type | Screw Compressor |
Air Compressor Model | AOK 20SS |
Operating Pressure | 20 Bar |
Drain Capacity | 167 l/h |
Connections | 1/2 |
Operating Temp. Range | 1,5 To 65 DegreeC |
Material | 1.4404 (Stainless Steel) |
Product Code: AOK 20SS
AOK 20SS
AOK20 SS is designed for fully automatic discharging of condensate or any other non aggressive fluid from compressed air system. For any other technical gas please contact producer or your local distributor. The unit can be installed as external drain on any application specified below. Condensate accumulates in the stainless steel reservoir and when the level is high enough the condensate is discharged from the system without any air loss. A direct acting valve is operated by a precise level controlled floater which assures reliable and efficient operation. Thanks to its robust stainless steel housing AOK20 SS is suitable for heavy duty applications. On the front, the AOK20 SS, is also equipped with a separate manual drain for venting.
Product Details:
Material | Stainless Steel 1.4404 |
Model Name/Number | CKL-IHP series |
Operating Pressure | 100, 250, 400 Bar |
Volume Flow Rate | 40 To 715 Nm3/h |
Connections | 1/4 To 2 |
Operating Temp. Range | 1,5 To 65 DegreeC |
Surface Protection | Nickel Plated 25 |
CKL-IHP condensate separators are designed for high efficient removal of bulk liquids fromhigh pressure compressed air systems. Condensate separator element inside the housing separates already liquefied water from mainstream and prevents the liquids and large particles from being airborne again. To discharge condensate from the CKL-IHP condensate separator it is essential to install condensate drain. Please take appropriate pressure level into account.
Product Details:
Model Name/Number | CKL- B series |
Operating Pressure | 16 bar |
Volume Flow Rate | 60 To 2160 |
Connections | 2 to 3 |
Operating Temp. Range | 1,5 to 65 DegreeC |
Standard Colour | RAL 9005 |
Product Code: CKL-B series 16 bar
CKL-B condensate separators are designed for high efficient removal of bulk liquids from compressed air and vacuum systems. Inside the housing there is an insert with vanes that creates controlled rotation of the air. As a result of centrifugal action, liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CKL-B cyclone separator it is essential to install automatic or electronic condensate drain.
Product Details:
Model Name/Number | CKL-B HT series |
Operating Pressure | 16 Bar |
Volume Flow Rate | 60 to 2160 Nm^3/h |
Connections | 2 to 3 |
Operating Temp. Range | 1,5 to 120 DegreeC |
Standard Colour | RAL 9005 |
Product Code: CKL-B HT series
CKL-B HT are high temperature condensate separators, which are designed for high efficient removal of bulk liquids from high temperature compressed air and vacuum systems. Inside the housing there is an insert with vanes that creates controlled rotation of the air. As a result of centrifugal action, liquids (water, oil) and large particles are forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the CKL-B HT cyclone separator it is essential to install manual or automatic condensate drain.
Product Details:
Model Name/Number | CKL-CHP series |
Operating Pressure | 100, 250, 400 bar |
Volume Flow Rate | 40 to 715 Nm3/h |
Connections | 1/4 to 2 |
Operating Temp. Range | 1,5 to 65 DegreeC |
Standard Colour | Nickel Plated 25 |
CKL-CHP condensate separators are designed for high efficient removal of bulk liquids from compressed air systems. Condensate separator element inside the housing separates already liquified water from mainstream and prevents the liquids and large particles from being airborne again. To discharge condensate from the CKL-CHP condensate separator it is essential to install automatic or electronic condensate drain. Please take appropriate pressure level into account.
Product Details:
Model Name/Number | CKL-HF series |
Operating Pressure | 50 Bar |
Volume Flow Rate | 71 to 2760 Nm3/h |
Connections | 1/2 to 3 |
Operating Temp. Range | 1,5 to 65 DegreeC |
Standard Colour | RAL 9005 |
CKL-HF condensate separators are designed for high efficient removal of bulk liquids from compressed air systems. Inside the housing there is a condensate separator element. This element separates already liquefied water from mainstream and prevents the liquids and large particles from being airborne again. To discharge condensate from the CKL-HF condensate separator it is essential to install automatic or electronic condensate drain.
Product Details:
Material | Carbon Steel |
Model Name/Number | SFH HP |
Operating Pressure | 50 Bar |
Volume Flow Rate | 1760 To 12550 Nm3/h |
Connections | DN80 To DN350 |
Operating Temp. Range | 1,5 To 65 DegreeC |
Standard Colour | RAL 9005 |
SFH HP welded high pressure condensate separators are designed for high efficient removal of bulk liquids and large impurities from high pressure compressed air systems up to 50 bar. The insert inside the housing creates controlled rotation of the air flow. Centrifugal flow of liquids (water, oil) and large particles is forced to the housing wall, slowed down and accumulated at the bottom of separator housing as condensate. The turbulent free zone in the lower part of the cyclone housing prevents condensate from being picked up and “carried over” into the airstream. To discharge condensate from the SFH HP cyclone separator it is essential to install automatic or electronic condensate drain.